Transfer Files from One Computer to another Using Ethernet Cable

Today, we’re diving into direct file transfer between two computers using a simple yet effective method – Ethernet or LAN cable connection. By establishing a direct link, you can transfer files from one computer to another using ethernet cable without needing a Wi-Fi router or internet connection.

Highlights:

• Use an Ethernet cable to directly connect two computers for easy file sharing without internet.
• Assign simple static IP addresses to both computers to establish a network connection.
• Enable network sharing on both computers to effortlessly exchange files over the LAN cable.
• Pick a folder, share it with specific people, and grant permission for quick and easy file transfer.
• Keep in mind, this method works for Windows computers only; different methods are needed for Mac or Linux.

Transfer Files from One Computer to another Using Ethernet Cable

To transfer files between two computers using an Ethernet cable, connect the devices, establish a network connection with static IP addresses, enable network sharing, share a folder, and access shared files through File Explorer.

Remember, this method is specific to Windows computers. Let’s get started with the step-by-step guide!

Step 1: Plug in the Ethernet Cable

Begin by connecting one end of the Ethernet cable into the first computer and the other end into the second computer. This physical connection forms the basis for file sharing between the two devices.

Step 2: Establish a Network Connection

To enable file sharing, the next step is to establish a network connection between the two computers. This involves assigning static IP addresses to both machines within the same class. Here’s how you can do it:

• Open the network connection page by right-clicking on the Ethernet adapter and selecting “Properties.”
• Choose “Internet Protocol version 4” and click on “Properties.”
• Configure both computers with different IP addresses of the same class. Set the first computer as the default gateway for the second, and vice versa.

This establishes a network connection between the two computers, a crucial step for seamless file sharing.

Step 3: Enable Network Sharing

Now, let’s turn on network sharing on both computers:

• Open the advanced sharing settings through the Windows search bar.
• In the sharing settings, enable network discovery and file sharing for both private and public networks.
• Under the “All Networks” section, enable public folder sharing.
• Optionally, you can turn off password-protected sharing for easier access to shared files.

Repeat these steps on both computers to ensure a flawless setup.

Step 4: Share Folders

To share files, you first need to share a folder on one of the computers. Follow these steps:

• Move the files you want to share to a specific folder.
• Right-click on the folder, navigate to “Give access to,” and select “Specific people.”
• In the sharing window, choose “Everyone” from the drop-down menu, click “Add,” and grant both read and write permissions.
• Finally, hit the “Share” button.

Take note of the network location of the shared folder.

Step 5: Access Shared Files

On the second computer:

• Open File Explorer and enter the network location of the shared folder.
• Access the shared folder and transfer files by copying and pasting them onto the local hard drive.

The sharing PC will appear under the network panel, allowing easy access to all shared folders.

Step 6: Stop Sharing

If you want to stop sharing a folder:

• Right-click on the shared folder, select “Give access to,” and then choose “Remove access.”
• Click on “Stop sharing.”

Remember, this method is specific to Windows computers. For Mac or Linux, alternative file-sharing methods are required.

Conclusion

And there you have it – a comprehensive guide on how to transfer files from PC to PC using an ethernet cable. If you encounter any issues or have additional questions, drop a comment below, and we’ll be happy to assist you. 

Credit: https://www.reddit.com/r/techsupport/comments/uota1j/file_transfer_using_ethernet_cable/